Your One Stop Shop

Blake’s Remanufacturing is your One Stop Shop for all the parts and services needed to overhaul diesel and natural gas engines. No one else can provide this level of service. Blake’s Remanufacturing is the first choice for customers who want superior convenience, competitive pricing and a strong warranty.

Follow Blake's

Diesel Engine Parts Department

Diesel Engine Parts Example

Blake’s carrys a vast inventory of diesel engine parts and natural gas engine parts. Some of main parts we carry are below. Ask a Blake’s Remanufacturing parts specialist for more information on aftermarket parts, OEM parts or reman parts.

Parts Pricing Sheet: See if we have your part!


Parts Inventory Listed on Machinery Trader

Engines Listed on Diesel Engine Trader

Diesel Engine Parts List:

  • After and Inner Coolers
  • Injector Sets
  • AfterCooler Core
  • Intake Valves
  • Air / gas starting system
  • Keepers
  • Alternator
  • Lifters
  • Belts
  • Liner Ring Seal
  • Cam Bearings
  • Lower Gasket Set
  • Camshafts
  • Main Bearings
  • Clutches
  • Murphy Gauges
  • Connecting Rods
  • Natural Gas Carburetors
  • Cores
  • Oil Coolers
  • Crankshafts
  • Pistons
  • Cylinder Heads
  • Push Rods
  • Engine Blocks
  • Retainers
  • Exhaust Manifolds
  • Ring Set Piston
  • Exhaust Valves
  • Rocker Arms
  • Fastners
  • Rockers
  • Fuel Injectors
  • Rod Bearings
  • Fuel Pumps
  • Seats
  • Governors
  • Springs
  • Guides
  • Starters
  • Hoses
  • Steam Seals
  • Ignition Plugs and Coils
  • Thermostats
  • Injector Tube O-Rings
  • Upper Gasket Set
  • Injector Tubes
  • Waterpump Repair Kit
  • Injectors
  • Waterpumps

OEM Brands:

Blake’s offers OEM parts from all of the major manufacturers. Contact a Blake’s part specialist for more information about OEM diesel engine parts or natural gas engine parts.

•    Ajax
•    Allis Chalmers
•    Ariel
•    Arrow
•    Bedford
•    Buda
•    Caterpillar
•    Climax
•    Continental
•    Cooper
•    Cummins
•    Daewoo
•    Daihatsu
•    Detroit Diesel
•    Deutz
•    EMD
•    Fiat Allis
•    FordDiesel Engine Parts at Blakes
•    Frick
•    Gemini
•    Hanomag
•    Hatz
•    Hercules
•    Hino
•    International
•    Isuzu
•    Iveco
•    John Deere
•    Komatsu
•    Kubota
•    Leyland
•    Lister
•    Long
•    Mack
•    Massy Ferguson
•    Mercedes
•    Minneapolis
•    Mitsubishi
•    Moline
•    Murphy
•    Navistar
•    New Holland
•    Nissan
•    Oliver
•    Onan
•    Perkins
•    Renault
•    Scania
•    Toyota
•    Volvo
•    Waukesha
•    White/Superior
•    Yanmar

Aftermarket Suppliers:

For over 40 years Blake’s had maintained a strong relationship with our most trusted part suppliers. Through our wholesale discounts we can save you time and money by ordering through Blake’s. To order diesel engine parts or natural gas engine parts contact a Blake’s parts specialist today!

•    Arrow Engine Company
•    Bulldog
•    Costex
•    DelphiCaterpillar Diesel Engine Parts:Gasket Set
•    Interstate-McBee
•    IPD
•    Mahle Clevite
•    Maxiforce
•    PAI Industries
•    PEC Manufacturing Co.
•    PTC Power
•    QPP
•    The Bluementhal Companies
•    Turbo Supply

Cylinder Heads:

Blake’s Remanufacturing specializes in cylinder head remanufacturing and has all of the tools and technical expertise to get the job right the first time. Cylinder head repairs are often complex and require a high level of craftsmanship. Blake’s Remanufacturing has been refining our reman and rebuilding process as well as offering superior diesel engine parts for over 40 years.

We have the ability to remanufacture small cylinder heads all the way up to the CAT 3600 series which weighs over 500 lbs. Cylinder head remanufacturing consists of dissembling the head, magnafluxCylinder Heads and Diesel Engine Parts particle inspection and pressure testing for leaks using the state of the art Newclear Pressure Testing Machine. The vast majority of our diesel engine parts are magnafluxed and pressure tested for cracks.

Blake’s can perform a wide variety of cylinder head repairs and believes highly in its 13 distinct steps to cylinder head remanufacturing. Cylinder head remanufacturing consists of both basic and advanced repairs including injector tube replacement, valve guide and valve seat replacement, repairing bridge pin bores. We also resurface the deck and exhaust manifold on all cylinder heads regardless of diesel engine part’s condition. Crack repair in the casting can be performed both using cold stitch welding as well as hot oven welding techniques.  We can also repair cam bushing bores as well as any damage incurred in the exhaust manifold stud holes.

After all repairs have been addressed we reassemble the newly remanufactured cylinder head, check valve heights and vacuum check the seal between the valve face and the valve seat. If you would like to learn more about our 13 step process to remanufacturing cylinder heads or more about any of our other diesel engine parts click here.


When you think Blake’s you think Camshafts! Blake’s Remanufacturing was founded over 40 years ago as Blake’s Grinding which specialized in Camshaft Remanufacturing and diesel engine parts. We are the best in the business at what we do having produced well over 1,000,000 diesel engine parts including: camshafts, followers, lifters, crankshafts, connecting rods, cylinder heads and cylinder blocks. Our ISO 9001 level machine shop Remanufactured Camshafts and other Diesel Engine Partscontains the most up to date technology employed by some of the best remanufacturing professionals in the world.

Blake’s sells camshafts for all of the top brands including Caterpillar, Cummins, Detroit Diesel and more. Our most popular camshafts are Caterpillar C15 Camshaft, Caterpillar 3406 Camshaft, Caterpillar 3516 Camshaft, Cummins ISX Camshaft, Cummins N14 Camshaft, Detroit Diesel 60 Series Camshaft and Waukesha 7042 Camshaft.

The benefits of Blake’s remanufactured camshafts are that they are sometimes less that 50% less cost than traditional OEM camshafts. Our parts exchange program has over 20,000 diesel engine parts in stock at our facility in Denver, Colorado. Typically, camshafts ship within a day or two of ordering which means less downtime for your operation. Blake’s has always had a reputation in the industry of carrying old and out of date camshafts that fit no longer supported engines. Give us a call if you need help locating that hard to find camshaft; chances are we have one in stock!

Connecting Rods:

Blake’s connecting rod department stands behind its superiority and precise quality control standards. We hire the best connecting rod remanufacturing specialists in the business. More often than not, we recruit connecting rod grinders and diesel engine parts specialists from highly sought after remanufacturing facilities across the country. In addition to excellent recruiting our apprentice program molds top prospects into expert connecting rod Cummins Connecting Rods and Diesel Engine Partsremanufacturers.

Remanufactured connecting rods are thoroughly cleaned and magnafluxed before being machined to OEM specifications. After machining the connecting rod is honed to the original diameter specified by the manufacturer to ensure proper distribution of stress on the bearings. Every new connecting rod comes with new bushings and then inspected for bend and twist.

Unlike most other machine shops, Blake’s employs a rigorous 12 step quality control process. Our quality control department uses independent and precisely calibrated testing instrumentation to ensure our connecting rods exceed OEM specifications. We make sure center-to-center balance is accurate, piston pin brushings are inspected and resized correctly and lastly we determine if the measurements between the piston bore and crank are retaken. Click the link below to read about Blake’s entire quality control process for connecting rods and other diesel engine parts.


Crankshafts grinding is part art part science. Blake’s employs some of the most experienced crankshaft grinders in the world with well over 142 years of experience between everyone in the department. At Blake’s, we have the special capability to grind crankshafts up to 14 feet in length. You can count on Blake’s to get the job right the first time as we have over 40 years of experience remanufacturing crankshafts and industrial diesel engine parts.

Once we receive a crankshaft we thoroughly clean the part in a chemical hot tank solution as well as hand clean to flush out the oil passages. Remanufactured crankshafts are rebuilt to exact OEMRemanufactured Crankshaft tolerances with no odd size bearings or journals. All of the thrust surfaces are micro-polished to guarantee precise surface contact for smooth engine operation and reduced stress on the bearings. It is important to inspect every journal with absolute critical accuracy; our quality control department works side by side with the crankshaft remanufacturing specialist to ensure accuracy.

After grinding the crankshaft we chamfered oil holes to further advance lubrication and every journal is hand polished to improve the life of the bearings. Blake’s Remanufacturing has a 25 point process to remanufacturing crankshafts. Click here to learn more about the 25 point process to crankshaft remanufacturing and other information about other diesel engine parts we offer.

Engine Blocks:

If you need an engine block you’ve come to the right place. Blake’s has assembled a great team of engine rebuilders that works quickly and with efficiency. Remanufacturing engine blocks is complex but important work which we have refined over the past 40 Remanufactured Engine Blockyears. We have the ability to machine small blocks all the way up to large engines over 20 feet in length.

Blake’s has developed an 18 step process to machining an engine using the best in diesel engine parts. Our attention to detail and quality control throughout the entire procedure ensures accuracy. It is this attention to detail that makes the best in the business at remanufacturing engine blocks.

Our custom made Berco Grinding machine coupled with CBN technology gives us the ability to machine an engine block to the exact roughness qualifications specified by OEM standards. To learn more about our 18 step process to engine block remanufacturing or other information about diesel engine parts click here.

Overhaul Kits:

Blake’s Remanufacturing is your one stop shop for diesel engine parts and natural gas engine parts. We provide many options to fit your specific engine needs. Whether you’re looking for a Engine Rebuild Kits / Overhaul Kitsremanufactured part or prefer aftermarket or OEM parts we have what you need. Complete engine rebuild kits make it easy to get everything you need in one bundle. Engine overhaul kits save you time and money by getting everything all at once.

We offer engine rebuild kits, remanufactured parts, OEM parts and aftermarket parts for all of the major manufacturers including Caterpillar©, Cummins©, Detroit Diesel©, Waukesha©, John Deere©, Mack©, Perkins©, International©/Navistar©, Komatsu© and many more.

Over the course of 40 years Blake’s has established some very fruitful relationships with some of the key diesel engine parts suppliers in the country. Blake’s has longstanding partnerships with Interstate-McBee, PAI, Costex, Turbo Supply, Bulldog and many more. Click here to learn more about our partnerships with our suppliers or would like to order diesel engine parts.

Remanufactured Engines:

Blake’s Remanufacturing can remanufacture or rebuild most types of diesel or natural gas engine. Remanufactured engines is what we do! We can remanufactured short block, medium block and longRemanufactured Engine block engines. Below is a list of components/services that come with each different engine block project. We also offer diesel engine parts and natural gas parts for short blocks, medium blocks and long blocks.

Long Block
•    Block
•    Cylinder Head
•    Crankshaft
•    Camshaft
•    Connecting Rods
•    Piston, Liners and Rings
•    Valve Train Group and Covers
•    Front Housing
•    Lifting Eye Group
•    Front Gear Group
•    Cover Group

Medium Block
•    Block
•    Connecting Rods
•    Crankshaft
•    Camshaft and Followers / Lifters
•    Cylinder Head
•    Pistons, Liners and Rings

Short Block
•    Block
•    Crankshaft
•    Connecting Rods
•    Pistons, Liners and Rings 

Warranty Programs:

Blake’s Remanufacturing stands behind the quality of its work and products. We know that unexpected things happen that is why we offer one of the strongest warranties in the industry. Our remanufactured parts warranty is good for 1 year. We offer an aftermarket parts warranty for 2 years for diesel engine parts and 1 year for natural gas engine parts. Lastly, we offer a 1 year warranty on engine service. Blake’s warranty includes diesel engine parts / natural gas engine parts, labor and progressive damage. You can rest assure Blake’s has got you covered! Contact your Blake’s representative for further details on all of our warranty programs.

Contact a Parts Specialist

engine generator request a quote

describe the image

Customer Service

We pride ourselves on superior customer service. Our proven expertise enables us to anticipate your needs and provide a higher level of support. Any time of the day or night, Blake’s Remanufacturing is your One Stop Shop for engine parts and service. When a machine goes down, there is no time to waste. Call our 24/7 Parts Hotline (1-877-922-2320 toll free) for immediate parts and service. 

  • We ship anywhere and deliver on time guaranteed.
  • Full Core Acceptance & Free Freight Policy.

Product Quality

Count on Blake’s for superior quality. Our state of the art machine shop and ISO9001 level documentation ensure that every part meets or exceeds OEM standards.

All of our remanufactured exchange engines are Dyno tested using our Land & Sea’s DYNOmite diesel dynamometer giving you the outstanding quality you deserve.

Our valuable parts exchange program and huge inventory of over 20,000 reman parts means that your receive parts sooner, for faster repairs and less downtime.